http://uvlampirheatingtech.com/en/tags/macchine/ Recent content in Macchine on UV Lamp IR Heating Tech Hugo en-us Sat, 20 Jun 2026 01:01:43 +0800 http://uvlampirheatingtech.com/en/posts/halogen-heating-lamp-for-pet-blow-macchine/ Sat, 20 Jun 2026 01:01:43 +0800 http://uvlampirheatingtech.com/en/posts/halogen-heating-lamp-for-pet-blow-macchine/ <p><img src="http://uvlampirheatingtech.com/images/a639e6a773407913880a1a0252bbaa98.jpg" alt="halogen heating lamp for pet blow macchine"></p> <h1 id="halogen-heating-lamps-for-pet-blow-molding-the-tech-that-actually-works">Halogen Heating Lamps for PET Blow Molding: The Tech That Actually Works</h1> <p>We build halogen heating lamps for one place: the PET blow molding line. Because on that line, the preform needs heat fast—focused heat—without turning the whole machine into a sauna. You need a heat source that hits hard the second it&rsquo;s on, holds <a href="https://o-yate.net">steady</a>, and drops right into the existing lamp housing. No drama.</p> <h2 id="power-voltage-and-size-getting-the-heat-to-match-the-machine">Power, Voltage, and Size: Getting the Heat to <a href="https://goldisgood.com">Match</a> the Machine</h2> <p>For PET blow molding, we size these lamps to pack a lot of heat into a small space. A typical unit runs at 400V and 2500W, so it heats quickly and keeps the temperature stable even when the machine keeps cycling. The tube is about 300mm long because that matches the standard heating zone width on most preform heating stations. That length gives you even coverage without hot spots at the ends. Here&rsquo;s the trade-off: more wattage and voltage mean faster response, but your machine&rsquo;s cooling and electrical setup has to be able to handle it. If you&rsquo;re running high cycle rates, the inside of the heating box gets hot. Make sure the airflow is enough—otherwise, you&rsquo;ll chew through lamp life.</p>