09751713 shortwave infrared halogen heaters

09751713 shortwave infrared halogen heaters

09751713 Shortwave Infrared Halogen Heaters: Power, Design, and Application

We built the 09751713 for engineers who need serious heat in a tight space. It’s all about delivering fast, focused energy exactly where you need it—when you need it.

Power that shows up on demand

This lamp punches at 2500W and 400V, packed into a 300mm tube. That kind of power density means it wakes up fast and hits the heat immediately. And here’s the practical part: running at higher voltage keeps the current lower for the same wattage. That cuts line losses and lets you use thinner wiring, which is a real relief when you’re squeezing everything into a crowded control panel. The 300mm length? It’s a smart compromise. Short enough to fit tight machine bays, long enough to keep filament temperature stable and output consistent.

Built to take the heat—again and again

The element sits inside a quartz envelope with a halogen cycle that keeps the filament clean, even at high temperatures. That’s what helps the output stay steady over the life of the lamp, instead of fading or failing like bare-wire heaters can. The quartz tube is made to handle rapid cycling without cracking under thermal shock. And we chose an R7s connector because it’s a proven industrial standard for this form factor. It wires up quickly, locks in securely, and carries the current safely—no hot spots.

Where it shines—and what to keep in mind

Use this heater when you need fast, localized heating: plastics forming, sealing, curing, drying. The shortwave infrared spectrum couples well into many materials, so the heat goes right where it matters. It’s 400V and 2500W, so it brings serious heat. That also means your machine’s cooling and electrical layout need to be properly set up to manage ambient heat and contact temperatures. If you’re swapping into an R7s-fitted system, it’s a direct drop-in. Just double-check your mounting clearances before you install it.